Zhengzhou Fusmar Machinery Co., Ltd environmental Briquette Press Equipment has good wear resistance, long life, ball slot processing technology, and other advantages is widely used in the metallurgical, chemical, sludge, and refractory materials such as environmental protection industry. Briquette Press Machine with a buffer inside the device can be better to maintain the equipment from the impact of hard objects, ball bowl adjustable device so that the two-roll ball bowl is always within the adjustable range, never dislocation.
Briquette Press Machine Structure Introduction
Briquette Press Machine structure consists of three parts: feeding part, transmission part, forming part. 1. The feeding part, mainly to achieve quantitative feed to ensure that the material evenly into the roll between. Screw feed device driven by the electromagnetic speed motor, the pulley, worm reducer rotation, will be forced into the main material into the feed port. Due to the constant torque characteristics of the electromagnetic speed control motor, when the amount of binder material of the screw feeder is equal to the amount of material required for the main engine, the constant feed pressure can be maintained to stabilize the pellet mass. If the amount of material is too large, the feeding device of the electrical overload; supply is too small is not a ball. So skilled operation is to ensure that the ball is an important condition for normal work.
2. The transmission part of the main drive system: motor - triangular belt - reducer - open gear - roll. Host by the electromagnetic speed motor to provide power, the pulley, cylindrical gear reducer, through the rod pin coupling to the drive shaft. The drive shaft and the passive shaft are operated synchronously through the open gear. The rear of the passive housing is equipped with a hydraulic device. The hydraulic protection device is a hydraulic pump to the high-pressure oil into the hydraulic cylinder, the piston axial displacement. The front end of the piston rod is mounted on the housing to meet the production pressure requirements.
3. Forming part, mainly refers to the host part, the core part is the roll. When the two rollers between the feed too much or into the metal block, the hydraulic cylinder piston rod under pressure, the hydraulic pump will stop, the accumulator on the pressure change from the buffer effect.
Briquette Press Machine Performance
Briquette Press Machine is mainly used for mineral tailings treatment, to suppress difficult to shape the powder material, which is characterized by large molding pressure, the host speed adjustable, with a screw feeding device. Working the belt to the reducer, the reducer through the coupling, to the drive shaft and then by a pair of gears to ensure that the two roller synchronization (constant speed reverse) material storage warehouse by the quantitative equipment evenly into the molding hopper, so that the material of the unit molding pressure from small to large. In the center of the roll forming the junction to reach the maximum pressure, the material after the line, the molding pressure quickly becoms smaller to make the material into the disengaged state, smooth ball. Briquette Press Machine on the more relaxed materials, such as coke powder, iron oxide skin. In addition to, dust, slime, all kinds of metallurgical powder, sponge iron-carbon products, and other materials effect is obvious, the role of extraordinary.
Hope this article can help you know more about briquette press equipment, if you want to build your own charcoal briquette plant, please contact us.
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
