Charcoal briquette machine is high-quality environmental protection equipment that made agriculture and forestry waste into mechanism charcoal. Equipment in production without adding chemical additives. Mechanism charcoal not only high efficiency, and smokeless, non-toxic, tasteless. It is a high quality equipment from raw material to production, to the cost of production accord with the theme of energy conservation and environmental protection.
Carbonization Is An Important Step In The Charcoal Briquette Production Line
The charcoal briquette production line can produce mechanism charcoal. The charcoal briquette production line equipment: crusher, dryer, charcoal briquette machine, and carbonization furnace. It divided into four basic processes: crushing, drying, briquette making, and carbonization. Among them, carbonization is an important step in the charcoal briquette production line.
The Ways Of Carbonization In The Charcoal Briquette Machine Production Line
There are various ways of carbonization in the charcoal briquette production line, which can divide into two categories: internal combustion and dry distillation. They just have different carbonization process requirements. The carbonization temperature should be 550 degrees to 600 degrees. The early heating should be slowly. Clay kiln should be the best for 15 hours, carbonization furnace for 2-3 hours. Long heating time in the early stage can prevent moisture and cracking of raw rods, ensure the carbonization quality.
Carbonization Furnace And Clay Kiln
The quality of the carbonization furnace closely related to the wetness and dryness of the raw material rod, and the density of the raw material rod should be greater than 1. The simple inspection method is: take a section of the raw material rod into the water, the specific gravity of sinking in water is greater than 1, the specific gravity of floating is less than 1. The density of specific gravity is higher, and the quality of the produced mechanism charcoal is better.
After the machine-made charcoal comes out of the kiln, it must be ventilated before carbon is released to prevent carbon dioxide poisoning. The charcoal leaving the kiln should be arranged outside the kiln for more than 8 hours to prevent the re-ignition of ash and fire. Zhengzhou Fusmar Machinery is a professional charcoal briquette machine manufacturer, welcome to check our website.
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)